Air humidity measuring technology
Electrical devices
Electrical humidity sensors are measuring the relative air humidity, usually by a measuring element that changes the electric capacity proportionally to the air humidity. The measuring signal is always prepared, and is output either via an analogue standard signal, or via a serial digital interface with MODBUS protocol, for example.
Sensors for the measurement of relative air humidity are often combined with temperature sensors in one instrument.
Product
Product name
Product name / Brief description
Compare
Particulate-hygro-thermo-baro sensor compact
1.1007.54.xxxParticulate-hygro-thermo-baro sensor compact
1.1007.54.xxx
The particulate-hygro-thermo-baro sensors from our COMPACT series are designed to meas-ure relative humidity, air temperature and barometric air pressure, and fine dust values PM10 and PM 2.5.
The use of high-quality sensors for the parameters to be measured allows the sensor to achieve the following:
• High long-term stability
• Virtually linear characteristic
• Good dynamic behaviour
• Dewing resistance
• Low temperature coefficients
• Small hysteresis
Interfaces:
• digital outputs MODBUS RTU / THIES
• plug connection
• calble connection
Hygro-Thermo-Baro Transmitter Compact
1.1006.54.xxxHygro-Thermo-Baro Transmitter Compact
1.1006.54.xxx
Hygro-Thermo-Baro transmitters from our COMPACT series are designed to measure rela-tive humidity, air temperature and barometric air pressure.
The use of high-quality sensors for the parameters to be measured allows the sensor to achieve the following:
• High long-term stability
• Virtually linear characteristic
• Good dynamic behaviour
• Dewing resistance
• Low temperature coefficients
• Small hysteresis
Interfaces:
• digital outputs MODBUS RTU / THIES
• analog outputs
• plug connection
• calble connection
Hygro-Transmitter
1.1000.50.xxxHygro-Transmitter
1.1000.50.xxx
Measures and indicates humidity.
Equipped with electrical output for longrange transmission. Sturdy construction. The exposed
parts such as the case head and the immersion stem are made of stainless steel.
Psychro transmitter
1.1130.xx.000Psychro transmitter
1.1130.xx.000
Measuring instrument to determine the air humidity values based on the dry and moist temperature An attached water container provides for the moistening of the psychro sensor. The doublewalled protection tubes protect the sensor from radiation. A hanger, included in delivery, serves for the lateral mounting of the psychro-transmitter at a
facade, wall etc.
Soil Moisture Probe Trime-Pico 32
1.0231.00.xxxSoil Moisture Probe Trime-Pico 32
1.0231.00.xxx
Soil moisture sensor with integrated temperature sensor.
Hygro-ThermoTransmitter
1.1005.50.xxxHygro-ThermoTransmitter
1.1005.50.xxx
Instrument designed for measurement of temperature and air humidity.
Hygro-Thermo Transmitter compact
1.1005.54.1xxHygro-Thermo Transmitter compact
1.1005.54.1xx
Instrument designed for measurement of temperature and air humidity.
• analog outputs
Hygro-Thermo Transmitter compact
1.1005.54.7xxHygro-Thermo Transmitter compact
1.1005.54.7xx
Instrument designed for measurement of temperature and air humidity. With plug connection.
• analog outputs
• plug connection
Hygro-Thermo Transmitter compact
1.1005.54.780Hygro-Thermo Transmitter compact
1.1005.54.780
Instrument designed for measurement of temperature and air humidity.
• MODBUS RTU interface
• plug connection
Clima Sensor US
4.920x.x0.00xClima Sensor US
4.920x.x0.00x
The CLIMA SENSOR US serves for the measurement of environmental parameters. These are available for further processing as
• Serial telegram via an RS485/422
and /or as
• Analogue signals via voltage outputs
Clima Sensor US
4.921x.x0.00xClima Sensor US
4.921x.x0.00x
The CLIMA SENSOR US serves for the measurement of environmental parameters. These are available for further processing as
• Serial telegram via an RS485/422
and /or as
• Analogue signals via voltage outputs
Heated components:
• Housing
• Ultrasonic transducers
Matching accessories will be displayed in the detail view